1. Statutory Text and Role in Workplace, Industrial, and Elevator Safety
Section 289 of the Bharatiya Nyaya Sanhita, 2023 (BNS) governs criminal rashness and negligence in operating, maintaining, or guarding any machinery S1, s. 289. The enacted Gazette text provides verbatim:
289. Negligent conduct with respect to machinery.—Whoever does, with any machinery, any act so rashly or negligently as to endanger human life or to be likely to cause hurt or injury to any other person or knowingly or negligently omits to take such order with any machinery in his possession or under his care as is sufficient to guard against any probable danger to human life from such machinery, shall be punished with imprisonment of either description for a term which may extend to six months, or with fine which may extend to five thousand rupees, or with both. S1, s. 289
In practice, Section 289 BNS (formerly Section 287 IPC) is the primary penal provision invoked in factory floor accidents involving unguarded power presses, lathes, boilers, or conveyor belts, agricultural thresher and fodder-cutter injuries, construction crane or hoist failures, amusement-park ride malfunctions, and residential/commercial lift (elevator) or escalator accidents S1, s. 289; S6; S7.
2. Dissection of the Two Statutory Limbs and the Expanded "Under His Care" Standard
While Section 289 BNS follows the two-limb pattern of Sections 286–288 BNS, the legislature deliberately drafted Limb 2 of Section 289 BNS more broadly than in the preceding three sections S1, ss. 286–289:
- Limb 1: Positive Rash or Negligent Act with Any Machinery:
- Conduct: Doing any positive act with any machinery (any mechanical apparatus, engine, motor-driven tool, boiler, lift, crane, turbine, or appliance designed to apply or transmit mechanical power, whether powered by electricity, steam, diesel, hydraulics, or manual gearing) S1, s. 289.
- Mental Element: Acting "so rashly or negligently" S1, s. 289.
- Endangerment Threshold: Endangering human life or being likely to cause hurt or injury to any other person S1, s. 289.
- Limb 2: Knowing or Negligent Omission Respecting Machinery "In His Possession or Under His Care":
- Broader Nexus ("In His Possession OR Under His Care"): Notice a critical textual contrast with Sections 286, 287, and 288 BNS: whereas those sections limit omission liability to a substance "in his possession", Section 289 BNS extends omission liability to any machinery "in his possession or under his care" S1, ss. 286–289.
- Why does this matter in practice? In modern industrial, commercial, and residential settings, the legal possessor of heavy machinery (such as a corporate factory owner or housing society) often delegates day-to-day maintenance and safety guarding to a plant engineer, shift supervisor, boiler attendant, or contracted elevator maintenance agency S1, s. 289; S6; S7. Because the machinery is "under his care" even if not in his legal possession, such an engineer, supervisor, or maintenance contractor is directly liable under Limb 2 of Section 289 BNS if they knowingly or negligently omit to take sufficient order (e.g., removing safety guards, bypassing interlocks, or ignoring frayed lift cables) to guard against probable danger to human life S1, s. 289; S6; S7.
3. IPC-to-BNS Correspondence and Statutory Comparison
Section 289 BNS directly replaces Section 287 of the Indian Penal Code, 1860 (IPC) S1, s. 289; S4, s. 287; S5:
| Attribute | IPC Section 287 (Repealed w.e.f. 01-07-2024) | BNS Section 289 (Effective 01-07-2024) | Legal & Practical Significance |
|---|---|---|---|
| Section Number & Heading | Section 287: Negligent conduct with respect to machinery. S4, s. 287 | Section 289: Negligent conduct with respect to machinery. S1, s. 289 | Renumbered within Chapter XV of the BNS S5. |
| Substantive Ingredients | Two-limb offence covering positive rash/negligent act OR knowing/negligent omission with machinery "in his possession or under his care" S4, s. 287 | Identical word-for-word S1, s. 289 | Complete continuity of offence ingredients S1, s. 289; S4, s. 287. |
| Maximum Imprisonment | Imprisonment of either description up to six months S4, s. 287 | Imprisonment of either description up to six months S1, s. 289 | Unchanged S1, s. 289; S4, s. 287. |
| Maximum Fine | Up to ₹1,000 ("one thousand rupees") S4, s. 287 | Up to ₹5,000 ("five thousand rupees") S1, s. 289 | Five-fold increase in statutory fine ceiling S1, s. 289; S4, s. 287; S5. |
4. Punishment Matrix and Default-of-Fine Rules
Under Section 289 BNS, the sentencing court may impose S1, s. 289:
- Imprisonment: Up to six months of either description (rigorous or simple under Section 7 BNS) S1, ss. 7, 289; or
- Fine: Up to ₹5,000 S1, s. 289; or
- Both imprisonment and fine S1, s. 289.
- Default of Fine: Under Section 8(3) BNS, imprisonment in default of payment of fine cannot exceed one-fourth of the maximum term fixed for the offence, that is, 1.5 months (45 days), of either description S1, s. 8(3)–(4).
5. Procedural Classification (BNSS 2023) and Overlap with the Factories Act, 1948
A. BNSS First Schedule Classification (Non-Cognizable Contrast)
A crucial procedural distinction separates Section 289 BNS (machinery) and Section 290 BNS (buildings) from Sections 286–288 BNS (poisons, fire, explosives) S2, First Schedule:
- Cognizability: Non-cognizable S2, First Schedule. Unlike Sections 286, 287, and 288 BNS (which are cognizable), a standalone offence under Section 289 BNS is non-cognizable; under Section 174(2) BNSS, a police officer cannot investigate a standalone Section 289 BNS offence without an order of a competent Magistrate S2, s. 174(2), First Schedule. However, if a machinery accident actually causes hurt, grievous hurt, or death, police routinely add Section 125(a)/(b) BNS or Section 106(1) BNS, which are cognizable, thereby enabling the entire case to be investigated as a cognizable case under Section 174(4) BNSS (formerly Section 155(4) CrPC) S1, ss. 106, 125, 289; S2, s. 174(4), First Schedule.
- Bailability: Bailable S2, First Schedule.
- Triable Court: Any Magistrate (triable summarily under Section 283(1) BNSS) S2, s. 283(1), First Schedule.
- Compoundability: Non-compoundable under Section 359 BNSS S2, s. 359.
B. Overlap with the Factories Act, 1948 and Boilers Act, 1923 / 2025
In registered factories, Chapter IV of the Factories Act, 1948 (Sections 21–41) mandates fencing of machinery, safety of hoists and lifts, and pressure-plant precautions, with contraventions punishable under Section 92 of the Factories Act, 1948 (upon complaint of a Factory Inspector under Section 105). Under Section 1(6) BNS and Section 26 of the General Clauses Act, 1897, while the special statute prevails in its domain and an offender cannot be punished twice for the same offence, High Courts have examined whether a general penal prosecution is maintainable where the allegations are identical to a Factories Act prosecution already instituted S1, s. 1(6).
6. Governing Judicial Principles
In workplace machinery prosecutions under Section 287 IPC (now Section 289 BNS), as illustrated in State v. Kamlesh Kumar (Delhi Courts, 2024) and the Supreme Court's negligence jurisprudence in Sushil Ansal v. State Through CBI, (2014) 6 SCC 173: courts insist on proof of three evidentiary pillars S6; S7, paras 48–85:
- Proof of Possession or Care: Documentary or testimonial evidence establishing that the specific accused (whether owner, occupier, contractor, or supervisor) had possession or care of the machine at the relevant time S6; S7.
- Mechanical Inspection / Specific Defect: A mechanical inspection report or expert evidence proving that the machine lacked a required safety guard, had a defective brake/interlock, or was operated in an unsafe manner S6.
- Absence of Sole Victim Fault: Where an experienced adult machine operator deliberately disables a functioning safety guard contrary to express instructions and suffers injury despite the employer having provided a properly guarded machine, criminal negligence cannot be fastened on the employer automatically without proof of the employer's culpable act or omission S6; S7.
7. Practical Illustrations and Counterexamples
- Editorial Hypothetical 1 (Disabling Two-Hand Safety Interlock on Power Press: Limb 2 Offence): A, a workshop supervisor having care of a hydraulic sheet-metal stamping press, deliberately disconnects the two-hand safety interlock sensor to speed up production, leaving the descending ram unguarded. Even before a worker's hand is caught, A is liable under Limb 2 of Section 289 BNS for knowingly omitting to take sufficient order with machinery under his care to guard against probable danger to human life S1, s. 289; S6.
- Editorial Hypothetical 2 (Swinging Construction Crane Load Over Crowded Street: Limb 1 Offence): B, a crane operator, swings a multi-ton steel girder suspended from a mobile crane directly over moving traffic on an unbarricaded street without tagline control, causing the load to sway dangerously close to a passenger bus. B commits an offence under Limb 1 of Section 289 BNS S1, s. 289.
- Editorial Counterexample (Properly Guarded Machine Tampered With by Trespasser: No Offence): C, an agricultural landowner, locks the power switch of his chaff-cutter machine and fits its blades with a steel protective hood before leaving his barn. An unauthorized trespasser breaks the lock, removes the hood, and injures himself. Because C took sufficient order with the machinery in his possession, C is not guilty under Section 289 BNS S1, s. 289.