IPC2BNSConverter

BNS Section 187 · Deep dive

BNS Section 187: Mint Employee Debasing Coin Weight or Alloy Composition (IPC Section 244 Comparison)

BNS Section 187 (formerly IPC Section 244) is a specialized insider-integrity offence that punishes any person employed in a mint who unlawfully does any act which causes any coin issued from that mint to be of a different weight or composition from that fixed by law S1, s. 187; S3, s. 244. It carries a severe mandatory cumulative sentence of imprisonment of either description for up to seven years and a fine, and is Cognizable, Non-bailable, and triable by a Magistrate of the First Class S1, s. 187; S4.

By the Nyaya Yantra Editorial TeamLaw checked as of 16 October 2026 6 min read

Prepared with AI-assisted research from the official sources listed at the end of this article.

At a glance

Provision
BNS Section 187 — Person employed in mint causing coin to be of different weight or composition from that fixed by law
Earlier law (IPC)
Section 244 · direct
Side-by-side converterIPC 244 → BNS 187

Overview and Purpose: Protecting Sovereign Mint Integrity from Inside

While Sections 178 to 181 of the Bharatiya Nyaya Sanhita, 2023 (BNS) address external counterfeiting and alteration of coins after or outside official minting, Sections 187 and 188 BNS safeguard the internal security and metallurgical integrity of official mints S1, s. 178-181, s. 187-188.

Historically known in English common law as the felony of debasement at the Trial of the Pyx, Section 187 BNS (which directly replaces Section 244 of the Indian Penal Code, 1860 (IPC)) targets mint insiders (metallurgists, assay officers, melters, blanking-press operators, or supervisors) who abuse their access to official coining presses to strike genuine-looking coins that deviate from the standard weight or metallic alloy composition mandated under Sections 4 and 5 of the Coinage Act, 2011 S1, s. 187; S3, s. 244. Whether motivated by a scheme to siphon off precious or industrial metals (such as nickel, copper, or silver/gold in commemorative coins) or to sabotage the currency, such insider debasement undermines public confidence in sovereign coinage at its source S1, s. 187.

Statutory Text and Core Ingredients

Section 187 BNS states:

"Whoever, being employed in any mint lawfully established in India, does any act, or omits what he is legally bound to do, with the intention of causing any coin issued from that mint to be of a different weight or composition from the weight or composition fixed by law, shall be punished with imprisonment of either description for a term which may extend to seven years, and shall also be liable to fine." S1, s. 187; S3, s. 244

To establish an offence under Section 187 BNS, the prosecution must prove four cumulative ingredients:

1. Special Status of the Accused: "Employed in Any Mint Lawfully Established in India"

The principal offender must be a person employed (whether permanently, contractually, or in a supervisory/technical capacity) in a mint lawfully established in India: today, the India Government Mints operated under the Security Printing and Minting Corporation of India Limited (SPMCIL) pursuant to the Coinage Act, 2011 S1, s. 187. (An outsider who colludes with a mint employee can be prosecuted for abetment under Chapter IV BNS read with Section 187) S1, s. 45, s. 187.

2. Actus Reus: Positive Act OR Illegal Omission

In accordance with Section 2(1) BNS (where "act" includes illegal omissions) and the express wording of Section 187, the conduct may consist of:

  • A Positive Act: e.g., substituting a cheaper base metal into the smelting furnace, recalibrating the rolling mill to produce thinner coin blanks (planchets), or altering the alloy ratio S1, s. 187; or
  • An Omission of a Legal Duty: e.g., a quality-control or assay officer intentionally omitting to reject a defective melt batch or failing to regulate furnace controls that they are legally bound to maintain S1, s. 187.

3. Mens Rea: Specific Intention to Cause Deviation in Weight or Composition

The act or omission must be committed with the intention of causing any coin issued from that mint to be of a different weight or composition from that fixed by law S1, s. 187. Accidental mechanical variance, inadvertent human error on the mint floor, or deviations falling within the statutory "remedy" (tolerance margin allowed under the Coinage Act rules) without intentional manipulation are not criminal under Section 187 BNS S1, s. 187.

4. Causal Nexus vs. Completion of Issue

Notice the exact statutory phrasing: doing any act or omission "with the intention of causing any coin issued from that mint to be of a different weight or composition" S1, s. 187. The offence focuses on the intentional act or omission by the mint employee directed at coins to be issued from the mint; the prosecution need not prove that the debased coin was subsequently spent by a member of the public in the market S1, s. 187.

IPC-to-BNS Comparison Table

FeatureIPC Section 244 (1860)BNS Section 187 (2023)Legal Significance
Section NumberSection 244 (Chapter XII) S3Section 187 (Chapter X) S1Relocated to the end of Chapter X alongside Section 188 S1; S3.
Substantive WordingMint employee doing act or omitting legal duty with intention of causing coin issued from mint to differ in weight or composition from law S3Identical verbatim wording S1Zero substantive alteration S1; S3.
PunishmentImprisonment of either description up to 7 years, and fine S3Imprisonment of either description up to 7 years, and fine S1Mandatory cumulative imprisonment and fine preserved S1; S3.

Punishment and Procedural Classification under BNSS

Offence BranchPunishmentCognizabilityBailabilityTriable Court
Mint employee causing coin to differ in weight/composition (Section 187 BNS)Imprisonment of either description up to 7 years AND fine S1, s. 187Cognizable S4Non-bailable S4Magistrate of the First Class S4

Because the statute uses "and shall also be liable to fine", a court convicting under Section 187 BNS must impose a sentence of imprisonment (of some duration up to 7 years) as well as a fine; fine alone is not permissible S1, s. 187.

Practical Examples and Counterexamples

Example 1: Skimming Silver from Commemorative Coin Melts (Offence Committed)

Assumed Facts: K, a chief melter at an India Government Mint, is tasked with preparing a statutory quaternary alloy (50% silver, 40% copper, 5% nickel, 5% zinc) fixed by central notification for a ₹1,000 commemorative coin. To steal silver bullion, K intentionally substitutes extra copper into the crucible so that the struck coins contain only 35% silver, while an accomplice L (the assay officer) intentionally omits to record the failed spectrometer reading so the batch is cleared for issue. Legal Analysis: K (by positive act) and L (by omitting what he is legally bound to do) have acted with the intention of causing coins issued from the mint to be of a different composition from that fixed by law. Both are guilty under Section 187 BNS S1, s. 187.

Example 2: Unintentional Rolling-Mill Calibration Drift (Counterexample)

Assumed Facts: During a night shift at a mint, a hydraulic pressure valve on a blanking press suffers an unexpected mechanical leak, causing 2,000 ₹10 bi-metallic coin blanks to be 0.3 grams lighter than the statutory standard before the shift technician T notices the warning gauge and halts the line. Legal Analysis: T had no intention of causing coins to deviate from the statutory weight. Because specific intention is the core mens rea of Section 187 BNS, T commits no offence S1, s. 187.

Frequently asked questions

+Why are coins struck with the wrong alloy by a mint employee punished under BNS Section 187 instead of BNS Section 178 (counterfeiting coin)?
Because coins struck inside a lawful mint using official dies and authority are genuine sovereign coins rather than counterfeit imitations, even if an insider secretly alters their weight or metallic ratio S1, s. 178, s. 187. Section 187 BNS closes that technical gap by specifically criminalising intentional weight or composition deviation by mint personnel S1, s. 187.
+Does accidental manufacturing variation at a government mint attract criminal liability under Section 187 BNS?
No. Section 187 BNS explicitly requires that the act or illegal omission be done 'with the intention of causing' the coin to be of a different weight or composition from that fixed by law S1, s. 187. Honest mistakes or mechanical tolerances ('remedy' limits under the Coinage Act) are not offences S1, s. 187.
+Is an offence under BNS Section 187 bailable?
No. Under the BNSS First Schedule, an offence under Section 187 BNS is Cognizable, Non-bailable, and triable by a Magistrate of the First Class S4.

Sources

  1. S1The Bharatiya Nyaya Sanhita, 2023 (Act No. 45 of 2023), Chapter X: Of Offences Relating to Coin, Currency-Notes, Bank-Notes, and Government Stamps — Ministry of Home Affairs, Government of India (The Gazette of India Extraordinary) (accessed 16 October 2026)
  2. S2Ministry of Home Affairs Notification S.O. 850(E) — Commencement of the Bharatiya Nyaya Sanhita, 2023 — Ministry of Home Affairs, Government of India (accessed 16 October 2026)
  3. S3The Indian Penal Code, 1860 (Act No. 45 of 1860), Chapter XII: Of Offences Relating to Coin and Government Stamps — Legislative Department, Government of India (archived via Devgan Legal Reference) (accessed 16 October 2026)
  4. S4Bharatiya Nyaya Sanhita, 2023 — Chapter X (Sections 178 to 188) Statutory Text — Devgan.in Statutory Compendium (accessed 16 October 2026)
  5. S5eCourts IndiaCode — BNS Section 186: Prohibition of fictitious stamps — eCourts IndiaCode Legal Reference (accessed 16 October 2026)
  6. S6Target Website Context — IPC to BNS Mapping Portal — ipc2bns.in (accessed 16 October 2026)

Related deep dives

← All BNS section deep dives